Part Number Hot Search : 
HT56R64 NTCDP HCF4034 04N03L L9318E 80100 TA7414P HY5DV64
Product Description
Full Text Search
 

To Download TN8 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 (R)
TN8, TS8 and TYNx08 Series
8A SCRs
SENSITIVE & STANDARD
MAIN FEATURES:
Symbol IT(RMS) VDRM/VRRM IGT Value 8 600 to 1000 0.2 to 15 Unit
G
A
A
K
V mA
KA G
A
A
DESCRIPTION Available either in sensitive (TS8) or standard (TN8 / TYN) gate triggering levels, the 8A SCR series is suitable to fit all modes of control, found in applications such as overvoltage crowbar protection, motor control circuits in power tools and kitchen aids, inrush current limiting circuits, capacitive discharge ignition and voltage regulation circuits... Available in through-hole or surface-mount packages, they provide an optimized performance in a limited space area. ABSOLUTE RATINGS (limiting values)
Symbol IT(RMS) IT(AV) Parameter RMS on-state current (180 conduction angle) Average on-state current (180 conduction angle)
K
DPAK (TS8-B) (TN8-B)
A
A
G
IPAK (TS8-H) (TN8-H)
A
K
A
K
G
A
G
TO-220AB (TS8-T)
TO-220AB (TYNx)
Value Tc = 110C Tc = 110C 8 5 TS8/TN8 TYN 100 95 45
Unit A A
ITSM
Non repetitive surge peak on-state current It Value for fusing Critical rate of rise of on-state current IG = 2 x IGT , tr 100 ns Peak gate current Average gate power dissipation Storage junction temperature range Operating junction temperature range
tp = 8.3 ms tp = 10 ms tp = 10 ms F = 60 Hz tp = 20 s Tj = 25C Tj = 25C Tj = 125C Tj = 125C Tj = 125C
73 70 24.5 50 4 1
A A2S A/s A W C V
I t dI/dt IGM PG(AV) Tstg Tj VRGM
- 40 to + 150 - 40 to + 125 5
Maximum peak reverse gate voltage (for TN8 & TYN only)
April 2002 - Ed: 4A
1/9
TN8, TS8 and TYNx08 Series
ELECTRICAL CHARACTERISTICS (Tj = 25C, unless otherwise specified)
s
SENSITIVE
Symbol IGT VGT VGD VRG IH IL dV/dt VTM Vt0 Rd IDRM IRRM VD = VDRM IRG = 10 A IT = 50 mA IG = 1 mA ITM = 16 A RGK = 1 k RGK = 1 k RGK = 220 Tj = 125C Tj = 25C Tj = 125C Tj = 125C Tj = 25C Tj = 125C tp = 380 s RL = 3.3 k RGK = 220 Tj = 125C VD = 12 V RL = 140 Test Conditions MAX. MAX. MIN. MIN. MAX. MAX. MIN. MAX. MAX. MAX. MAX. TS820 200 0.8 0.1 8 5 6 5 1.6 0.85 46 5 1 Unit A V V V mA mA V/s V V m A mA
VD = 65 % VDRM
Threshold voltage Dynamic resistance VDRM = VRRM RGK = 220
s
STANDARD
Symbol IGT VD = 12 V VGT VGD IH IL dV/dt VTM Vt0 Rd IDRM IRRM VD = VDRM IT = 100 mA IG = 1.2 IGT VD = 67 % VDRM ITM = 16 A Gate open Tj = 125C Tj = 25C Tj = 125C Tj = 125C Tj = 25C Tj = 125C RL = 3.3 k Gate open Tj = 125C RL = 33 Test Conditions MIN. MAX. MAX. MIN. MAX. MAX. MIN. MAX. MAX. MAX. MAX. 25 30 50 TN805 TN815 TYNx08 0.5 5 2 15 1.3 0.2 40 50 150 1.6 0.85 46 5 2 30 70 150 2 15 V V mA mA V/s V V m A mA Unit mA
tp = 380 s
Threshold voltage Dynamic resistance VDRM = VRRM
THERMAL RESISTANCES
Symbol Rth(j-c) Rth(j-a) Junction to case (DC) Junction to ambient (DC) S = 0.5 cm
S= copper surface under tab
Parameter
Value 20 TO-220AB IPAK DPAK 60 100 70
Unit C/W C/W
2/9
/T
TN8, TS8 and TYNx08 Series
PRODUCT SELECTOR
Voltage (xxx) Part Number 600 V TN805-xxxB TN805-xxxH TN815-xxxB TN815-xxxH TS820-xxxB TS820-xxxH TS820-xxxT TYNx08 X X X X X X X X X X X X X 700 V 800 V X X X X 1000 V 5 mA 5 mA 15 mA 15 mA 0.2 mA 0.2 mA 0.2 mA 15 mA DPAK IPAK DPAK IPAK DPAK IPAK TO-220AB TO-220AB Sensitivity Package
ORDERING INFORMATION
TN
STANDARD SCR SERIES CURRENT: 8A
8
05
-
600
B (-TR)
PACKAGE: B: DPAK H: IPAK PACKING MODE: Blank: Tube -TR: DPAK Tape & Reel
SENSITIVITY: 05: 5mA 15: 15mA
VOLTAGE: 600: 600V 800: 800V
TS
SENSITIVE SCR SERIES CURRENT: 8A
8 20 -
600 B (-TR)
PACKAGE: B: DPAK H: IPAK T: TO-220AB PACKING MODE: Blank: Tube -TR: DPAK Tape & Reel
SENSITIVITY: 20: 200A
VOLTAGE: 600: 600V 700: 700V
TYN
STANDARD SCR SERIES VOLTAGE: 6: 600V 8: 800V 10: 1000V
6
08
(RG)
PACKING MODE Blank: Bulk RG: Tube CURRENT: 8A
3/9
TN8, TS8 and TYNx08 Series
OTHER INFORMATION
Part Number TN805-x00B TN805-x00B-TR TN805-x00H TN815-x00B TN815-x00B-TR TN815-x00H TS820-x00B TS820-x00B-TR TS820-x00H TS820-x00T TYNx08 TYNx08RG
Note: x = voltage
Marking TN805x00 TN805x00 TN805x00 TN815x00 TN815x00 TN815x00 TS820x00 TS820x00 TS820x00 TS820x00T TYNx08 TYNx08
Weight 0.3 g 0.3 g 0.4 g 0.3 g 0.3 g 0.4 g 0.3 g 0.3 g 0.4 g 2.3 g 2.3 g 2.3 g
Base Quantity 75 2500 75 75 2500 75 75 2500 75 50 250 50
Packing mode Tube Tape & reel Tube Tube Tape & reel Tube Tube Tape & reel Tube Tube Bulk Tube
Fig. 1: Maximum average power dissipation versus average on-state current.
P(W) 8 7 6 5 4 3 2 1 0 0 1 2 IT(av)(A) 3 4
360
Fig. 2-1: Average and D.C. on-state current versus case temperature.
IT(av)(A) 10.0 9.0 8.0 7.0 6.0 5.0 4.0 3.0 2.0 1.0 0.0
= 180
DC
= 180
Tcase(C) 0 25 50 75 100 125
5
6
Fig. 2-2: Average and D.C. on-state current versus ambient temperature (device mounted on FR4 with recommended pad layout) (DPAK).
IT(av)(A) 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0
Fig. 3-1: Relative variation of thermal impedance junction to case versus pulse duration.
K = [Zth(j-c)/Rth(j-c)] 1.0
DC
=180
0.5
0.2 Tamb(C) 0 25 50 75 100 125 0.1 1E-3 1E-2 tp(s) 1E-1 1E+0
4/9
TN8, TS8 and TYNx08 Series
Fig. 3-2: Relative variation of thermal impedance junction to ambient versus pulse duration (recommended pad layout, FR4 PC board for DPAK).
K = [Zth(j-a)/Rth(j-a)] 1.00
Fig. 4-1: Relative variation of gate trigger current and holding current versus junction temperature for TS8 series.
IGT,IH,IL [Tj] / IGT ,IH,IL [Tj = 25 C] 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 -40
IGT
DPAK
0.10
TO-220AB
IH & IL Rgk = 1k
tp(s) 0.01 1E-2 1E-1 1E+0 1E+1 1E+2 5E+2
Tj(C) -20 0 20 40 60 80 100 120 140
Fig. 4-2: Relative variation of gate trigger current and holding current versus junction temperature for TN8 & TYN series.
IGT,IH,IL [Tj] / IGT ,IH,IL [Tj = 25 C] 2.4 2.2 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 -40
Fig. 5: Relative variation of holding current versus gate-cathode resistance (typical values) for TS8 series.
IH[Rgk] / IH[Rgk = 1k]
IGT
IH & IL
Tj(C) -20 0 20 40 60 80 100 120 140
Rgk(k)
Fig. 6: Relative variation of dV/dt immunity versus gate-cathode resistance (typical values) for TS8 series.
dV/dt[Rgk] / dV/dt [Rgk = 220]
Fig. 7: Relative variation of dV/dt immunity versus gate-cathode capacitance (typical values) for TS8 series.
15.0 12.5 10.0 7.5 5.0 dV/dt[Cgk] / dV/dt [Rgk = 220 ]
VD = 0.67 x VDRM Tj = 125C Rgk = 220
Rgk(k)
2.5 Cgk(nF) 0.0 0 20 40 60 80 100 120 140 160 180 200 220
5/9
TN8, TS8 and TYNx08 Series
Fig. 8: Surge peak on-state current versus number of cycles. TS8/TN8/TYN.
Fig. 9: Non-repetitive surge peak on-state current for a sinusoidal pulse with width tp < 10 ms, and corresponding values of It.
ITSM(A),I2t(A2s) 1000
Tj initial = 25C
ITSM(A) 100 90 80 TYN 70 Non repetitiv e Tj initial = 25 C 60 50 TS8/TN8 40 30 Repetitive Tcase = 110 C 20 10 Number of cycles 0 1 10
tp = 10ms One cycle
dI/dt limitattion ITSM TS8/TN8 TYN I2t TS8/TN8 TYN
100
tp(ms) 100 1000 10 0.01 0.10 1.00 10.00
Fig. 10: On-state characteristics (maximum values).
Fig. 11: Thermal resistance junction to ambient versus copper surface under tab (Epoxy printed circuit board FR4, copper thickness: 35 m) (DPAK).
Rth(j-a) ( C/W) 100
ITM(A) 50.0
Tj max.: Vto = 0.85V Rd = 46m
80 60
Tj = 25C
10.0
Tj = Tj max.
1.0
40 20
VTM(V) 0.1 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0
S(cm 2) 0 0 2 4 6 8 10 12 14 16 18 20
6/9
TN8, TS8 and TYNx08 Series
PACKAGE MECHANICAL DATA DPAK (Plastic)
DIMENSIONS REF. Millimeters Min. A A1 A2 B B2 C C2 D E G H L2 L4 R V2 Max Min. Inches Max.
R
R
2.20 2.40 0.90 1.10 0.03 0.23 0.64 0.90 5.20 5.40 0.45 0.60 0.48 0.60 6.00 6.20 6.40 6.60 4.40 4.60 9.35 10.10 0.80 typ. 0.60 1.00 0.2 typ. 0 8
0.086 0.094 0.035 0.043 0.001 0.009 0.025 0.035 0.204 0.212 0.017 0.023 0.018 0.023 0.236 0.244 0.251 0.259 0.173 0.181 0.368 0.397 0.031 typ. 0.023 0.039 0.007 typ. 0 8
FOOTPRINT DIMENSIONS (in millimeters) DPAK (Plastic)
6.7
6.7
3 3 1.6 2.3 2.3 1.6
7/9
TN8, TS8 and TYNx08 Series
PACKAGE MECHANICAL DATA IPAK (Plastic)
DIMENSIONS REF.
A E B2 L2 C2
Millimeters Min. Typ. Max. 2.4 1.1 1.3 0.9 5.4 0.85 0.3 0.45 0.48 6 6.4 4.4 15.9 9 0.8 0.8 10 0.95 0.6 0.6 6.2 6.6 4.6 16.3 9.4 1.2 1 0.017 0.019 0.236 0.252 0.173 0.626 0.354 0.031 Min. 0.086 0.035 0.027 0.025 0.204
Inches Typ. Max. 0.094 0.043 0.051 0.035 0.212 0.033 0.035 0.037 0.023 0.023 0.244 0.260 0.181 0.641 0.370 0.047 0.031 0.039 10
D
H L
L1
B6
B3 B V1 A1
B5 G
C A3
A A1 A3 B B2 B3 B5 B6 C C2 D E G H L L1 L2 V1
2.2 0.9 0.7 0.64 5.2
TO-220AB (Plastic - with notches)
DIMENSIONS REF.
H2 Dia L5 C L7 L6 L2 F2 F1 L9 L4 F G1 G M E D A
Millimeters Min. Max. Min.
Inches Max.
A C D E F F1 F2 G G1 H2 L2 L4 L5 L6 L7 L9 M Diam.
4.40 4.60 1.23 1.32 2.40 2.72 0.49 0.70 0.61 0.88 1.14 1.70 1.14 1.70 4.95 5.15 2.40 2.70 10 10.40 16.4 typ. 13 14 2.65 2.95 15.25 15.75 6.20 6.60 3.50 3.93 2.6 typ. 3.75 3.85
0.173 0.181 0.048 0.051 0.094 0.107 0.019 0.027 0.024 0.034 0.044 0.066 0.044 0.066 0.194 0.202 0.094 0.106 0.393 0.409 0.645 typ. 0.511 0.551 0.104 0.116 0.600 0.620 0.244 0.259 0.137 0.154 0.102 typ. 0.147 0.151
8/9
TN8, TS8 and TYNx08 Series
PACKAGE MECHANICAL DATA TO-220AB (Without notches)
DIMENSIONS
B C
REF.
Millimeters Min. Typ. 3.75 Max. Min.
Inches Typ. 0.147 Max. 0.625
b2
L F I A
l4
a1
c2
l3
l2 a2
b1 e
M c1
A a1 a2 B b1 b2 C c1 c2 e F I I4 L l2 l3 M
15.20
15.90 0.598
13.00 14.00 0.511 0.551 10.00 10.40 0.393 0.409 0.61 0.88 0.024 0.034 1.23 1.32 0.048 0.051 4.40 4.60 0.173 0.181 0.49 0.70 0.019 0.027 2.40 2.72 0.094 0.107 2.40 2.70 0.094 0.106 6.20 6.60 0.244 0.259 3.75 3.85 0.147 0.151 15.80 16.40 16.80 0.622 0.646 0.661 2.65 2.95 0.104 0.116 1.14 1.70 0.044 0.066 1.14 1.70 0.044 0.066 2.60 0.102
Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. (c) The ST logo is a registered trademark of STMicroelectronics (c) 2002 STMicroelectronics - Printed in Italy - All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - Finland - France - Germany Hong Kong - India - Isreal - Italy - Japan - Malaysia - Malta - Morocco - Singapore Spain - Sweden - Switzerland - United Kingdom - United States. http://www.st.com
9/9


▲Up To Search▲   

 
Price & Availability of TN8

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X